€54.89
pcs
Item description
These crimped fittings with tear-off protection are developed specially for the 4 SH-hose. The 4 SH-hose should be skived not only externally but also internally. When compressing, a "metallic bond" is created between the fitting and the hose and this exposes the hose equipped with fittings to the maximum pressure load. The advantage of this combination is, amongst others, the use of a flexible 4-spiral hose or a 4-SH hose instead of a "rigid" 6-spiral hose.

Warning:
The hose must also be skived inside!
Properties
De­sign 4 SH sleeve
Con­nec­tion size 57 x 84 (Da x L)
DN [mm] 31
De­scrip­tion Fer­rule for 4 SH hoses (EN 856) for fit­ting with tear-​off pro­tec­tion
Further information on 544-20A
Weight 410 g / pcs
Customs duty number 73079980
RoHS compliant Yes
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available