€9.47
pcs
Item description
Materials:
Bodies: brass, internal parts: brass / stainless steel, seal: NBR

Temperature range:
-10°C to max. +80°C, ambience: max. +65 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request

Installation position:
With upright magnets

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Optional:
FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP

Information:
These valves are always supplied with a solenoid coil and a connector plug.
Properties
Ver­sion Spare mem­brane made of EPDM for ZS-​valves
Seals EPDM
Media tem­per­a­ture [°C] -10 to +120
Further information on ZS381234MEMEP
Weight 17 g / pcs
Customs duty number 40169300
RoHS compliant Yes
Manufacturer EMC
Documents
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge
**Spare diaphragm is supplied including all elastomer seals and can be used for subsequently changing the seal material.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available
Weekend shipping

Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).