HGDD-50-A (1163043) three-point gripper

Item number:

OT-FESTO032757

€1,987.61
pcs
Properties
size 50
Stroke per grip­per jaw [mm] 8
Max. ex­change pre­ci­sion [mm] <= 0,2 mm
Max. grip­per jaw play ax, ay [deg] <= 0,1 deg
Max. grip­per jaw play Sz [mm] <= 0,05 mm
Ro­ta­tional sym­me­try [mm] <= 0,2 mm
Re­peata­bil­ity grip­pers [mm] <= 0,03 mm
Quan­tity Grip­per jaws 3
in­stal­la­tion po­si­tion ar­bi­trary
Prin­ci­ple of op­er­a­tion dou­ble act­ing
Grip­per func­tion 3 point
Con­struc­tion set up In­clined plane,
Force con­trolled move­ment cycle
Po­si­tion de­tec­tion For prox­im­ity switch
Open total grip­ping force at 6 bar [N] 1.113
Close total grip­ping force at 6 bar [N] 1.044
Op­er­at­ing pres­sure [bar] 3 to 8
Op­er­at­ing pres­sure block­ing air [bar] 0 to 0.5
Max. work­ing fre­quency grip­per [Hz] <= 4 Hz
Min. open­ing time a 6 bar [ms] 93
Min. clos­ing time at 6 bar [ms] 128
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:4:4]
In­for­ma­tion about op­er­at­ing and con­trol medium Oiled op­er­a­tion pos­si­ble (re­quired in fur­ther op­er­a­tions)
Cor­ro­sion re­sis­tant class KBK 2 - mod­er­ate cor­ro­sion stress
Pro­tec­tion cat­e­gory IP65
am­bi­ent tem­per­a­ture [°C] 5 to 60
Open grip­per jaws at grip­ping force of 6 bar [N] 371
Close grip­per jaws at grip­ping force at 6 bar [N] 348
Mass in­er­tia [kg/cm²] 9,650
Max. force on grip­per jaws Fz sta­tic [N] 1.300
Max. torque on grip­per jaws Mx sta­tic [Nm] 45
Max. torque on grip­per jaws My sta­tic [Nm] 30
Max. torque on grip­per jaws Mz sta­tic [Nm] 30
Lu­bri­ca­tion in­ter­val guide el­e­ments [Mio SP] 5
Max. mass per ex­ter­nal griper fin­ger [g] 276
Prod­uct weight [g] 1.117
Fas­ten­ing type With Through­way bore and dowel pin,
With Fe­male thread and dowel pin,
Se­lec­tively:
Pneu­matic con­nec­tion block­ing air M5
Pneu­matic con­nec­tion G1/8
Ma­te­r­ial in­for­ma­tion RoHs com­pli­ant
Cover cap ma­te­r­ial High-​alloyed stain­less steels
Hous­ing ma­te­r­ial Alu­minium wrought alloy,
Smooth an­odised
Grip­per jaws ma­te­r­ial hard­ened,
Steel
Further information on OT-FESTO032757
Weight 1.117 g / pcs
Customs duty number 84798997
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available