High pressure 3-way ball valve, T-borehole, G 1/2", 0 to 500bar

Item number:

KH 3/12 T HD

€95.55
pcs
Item description
Materials:
Body: galvanised steel, ball: hard chrome-plated steel, seal: POM / NBR, handle: zinc die-cast (from DN 20: straight - aluminium, cranked - galvanised steel)

Temperature range:
-10 to +80 °C

Media:
Hydraulic oils, heating oil (water only after release by us). Apply input pressure only on the centre hole.

Switching position:
Can be changed by moving the handle, according to table, to position T4. The standard position for T boreholes is position T1.

Optional:
NPT thread -NPT, pressurisation from all 3 sides (PN 400, >= G 1/2": PN 350), housing burnished -D3
Properties
bore­hole T-​borehole
G G 1/2"
DN [mm] 13
PN [bar] 0 - 500
Ver­sion Stan­dard
SW [mm] 9
Re­place­ment han­dles alu­minium straight G KH SW9
Re­place­ment han­dles steel el­bowed G KH SW9 GK
Further information on KH3/12THD
Weight 700 g / pcs
Customs duty number 84818081
Manufacturer Hydac
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available