€409.84
pcs
Item description
Construction type:
Rodless cylinder with direct force reduction through the pipe-slit on the yoke, both sides with adjustable end position damping, can be swapped with many other manufacturers

Materials:
Cylinder tubes, cylinder heads and drive rollers: anodized aluminium, seals: NBR / PUR, masking tape: Stainless steel

Temperature range:
-20 to +80 °C

Operating pressure:
max. 8 bar

Stroke:
at will up to 6,000 mm

Installation position:
arbitrarily, however, preferably yoke downward to avoid soiling.

Compressed air connection:
both sides (anytime by removing closing plugs on one side or below, or combinations thereof can be reconstructed)

Version:
With Magnetic piston

Cylinder switch type:
D, A (Ø 18: D or A in combination with fastening AB2)
Properties
Pis­ton di­am­e­ter [mm] 18
Stroke [mm] 300
Ver­sion Stan­dard
D (com­pressed air port) M 5
Re­pair sets (with all wear parts) LZ 18/2500 REP
Re­pair sets (only damp­ing ring and grooved ring) LZ 18 REP
lat­eral force per­mis­si­ble [N] 0
A [mm] 80
A1 [mm] 57,5
AF [mm] 50
AF1 [mm] 15
AM [mm] 10
B [mm] 35
E [mm] 103
E1 [mm] 58
F [mm] 75
F1 [mm] 30
J [mm] 3,0
M [mm] 15,5
MF [mm] 50
N M 3
N1 [mm] 7,0
O [mm] 3,5
OP [mm] 3,4
S [mm] 23,5
T M 3
T1 [mm] 7
U [mm] 30
W [mm] 39,0
WF [mm] 48
Damper length [mm] 15
Further information on LZ18/300
Weight 800 g / pcs
Customs duty number 84123100
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available