€299.06
pcs
Item description
Operating range:
Pneumatic pinch valves are the fitting solution for the shut-off, regulation and dosing of abrasive, corrosive and fibrous products. They are ideally suited for use with these products due to their completely free product flow, whereby a practical blocking and dead space-free fitting results. The pneumatic pinch valves ensure an optimal shut-off, also when used with solids, such as granules, powders, pellets, chipping, sand, cement, gravel, textile fibres, carbon, fine glass fragments and liquids that contain solids.

Advantages:
•Completely free flow,
•No clogging by media,
•Minimum frictional resistance,
•Quick opening and closing,
•Low energy consumption


Materials:
Body: Type stainless steel: 1.4408, aluminium type: powder-coated aluminium, type POM: POM, socket: 1.4408 (type POM: POM), cuff: light-coloured natural rubber in food quality

Operating pressure:
0 to 6 bar

Control pressure:
max. 2 bar higher than the medium's pressure

Temperature range:
-10°C to max. +80°C

Optional:
Natural rubber sleeve, abrasion resistant (-10°C to max. +80°C) -AB, EPDM sleeve (-10°C to max. +120°C) -EP
Properties
Ma­te­r­ial Alu­minium
Ver­sion Pinch valve, sleeve made of EPDM
G G 1/2"
DN [mm] 15
L [mm] 95
A G 1/8"
Spare cuff made of nat­ural rub­ber (food grade) QVM 12 LE REP
Re­place­ment sleeve made of nat­ural rub­ber (abrasion-​resistant) QVM 12 AB REP
Spare sleeve EPDM QVM 12 EP REP
Tem­per­a­ture range [°C] -10 to +120
Further information on QVMC12-EP
Weight 320 g / pcs
Customs duty number 84818087
Documents
*Body POM

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available