Pneumatic valve DN65-PN16 (DIN) GGG40/Stainless steel/FKM

Item number:

KLZ 65/16 BBC ELI

€1,015.11
pcs
Item description
Butterfly valve


Materials:
Body: GGG40 epoxy-coated -B, stainless steel* -C
Washer: Stainless steel

Cuff: EPDM (-10°C up to max. +110°C) -A, NBR (+5°C up to max. +85°C) -B, FKM (+5°C to max. +180°C) -C


Media:
liquid and gaseous neutral media (depending on the material combination)

Lengths:
DIN 3202-K1, ISO 5752 series 20, EN 558-1 series 20, BS 5155 table 6 column 4, API 609 table1

Rotary actuator


Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:
Body: PA 6

Temperature range:
-20 to +70 °C

Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:
IP 67

Power-on time:
75%

Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
Properties
De­sign In­ter­me­di­ate flange valve
Ver­sion Stan­dard
Flange con­nec­tion DN65-​PN16 (DIN)
Hous­ing ma­te­r­ial GGG40
Washer ma­te­r­ial Stain­less steel
Sleeve ma­te­r­ial FKM
Nom­i­nal width [mm] 65
In­stal­la­tion length [mm] 46
Op­er­at­ing pres­sure, liq­uids (non-​hazardous) [bar] 10
Op­er­at­ing pres­sure, liq­uids (haz­ardous) [bar] 10
Op­er­at­ing pres­sure, gases (non-​hazardous) [bar] 10
Op­er­at­ing pres­sure, gases (haz­ardous) [bar] 10
Media tem­per­a­ture [°C] +5 to +180
Fields of ap­pli­ca­tion hot, dry air or gas, spe­cial media
Reg­u­lat­ing time [s] 9
Spare dri­ves ELU 230-3
Further information on KLZ65/16BBCELI
Customs duty number 84818081
Documents
*only available as an intermediate flange valve

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock