360-degree view: IQSG 188H ES LE - Screw in sockets R 1/8"-8mm push in nipple, IQS-ES LE
€10.81
Quantity
pcs
Immediately available
Item description
Materials: Type stainless steel: Body and release ring: 1.4401, seals FKM, green (FDA 21 CFR 177.2600), Holding claws: Stainless steel 1.4310, Lubricant: Silicone grease (NSF / ANSI 51 & 61) Type PVDF: body and release ring: PVDF, threaded part: Stainless steel 1.4401, gaskets: FKM, green (FDA 21 CFR 177.2600), retaining claws: Stainless steel 1.4310, lubricant: Silicone grease (NSF / ANSI 51 & 61)
Temperature range: Type stainless steel: -20 °C to +200 °C (Ø 16: -15°C to +190°C) Type PVDF: -20 °C to +120 °C
Operating pressure: Type stainless steel: -0.95 to 20 bar Type PVDF: Ø 4 - 6 mm: -0.95 to 20 bar (+20 °C), -0.95 to 10 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 8 mm: -0.95 to 20 bar (+20 °C), -0.95 to 8 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 10 - 12 mm: -0.95 to 12 bar (+20 °C), -0.95 to 6 bar (+100 °C), -0.95 to 3 bar (+120 °C)
Media: oiled and unoiled compressed air, non-hazardous gasses and liquids
Advantages: •Available with conical thread or with cylindrical thread with chambered O-ring, •Gaskets and lubricants with approval according to FDA or NSF/ANSI, •type PVDF: lighter and cheaper than push-in fittings made of stainless steel with simultaneous high chemical resistance, •type PVDF: transparent body allows visibility of the medium inside the connector
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.