360-degree view: KGE 3814 MS - Straight compression ring fitting G 3/8"-14 (M20x1,5)mm, brass
Exemplary representation: Straight screw-in fitting with cylindrical male thread, PA seal
360-degree view: KGE 3814 MS - Straight compression ring fitting G 3/8"-14 (M20x1,5)mm, brass
€13.92
Quantity
pcs
Immediately available
Item description
Temperature range: -60°C up to max. +300°C (with seal: -20°C up to max. +80°C)
Recommended raw materials: Copper, polyamide (with reinforced sleeve)
Note: The brass compression ring screw connections cannot be combined with the cutting ring pipe screw connectors ISO 8434-1 (DIN 2353). When using soft copper tube a correction factor of 0.65 must be used (pressure x 0.65). When using polyamide tube the operating pressure of the tube applies.
Materials: Body: brass, seal: Polyamide or NBR
Properties
Seals
PA
Pipe diameter (outer) [mm]
14 (M20x1,5)
Screw-in thread
G 3/8"
Operating pressure with hard copper tube [bar]
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.