{{ $t('shop.all.spaetbestellservice.hinweis') }}
- {{ ergebnis }}
-
{{ ergebnis.artikelnummer }}({{ ergebnis.artikelbezeichnung }})
{{ $t('shop.modules.login.willkommen_sis') }}
{{ $t('shop.display.bestellassistent.anmelden.bereits_kunde') }}
{{ $t('shop.modules.login.anmeldung_unterbenutzer') }}
{{ $t('shop.display.bestellassistent.anmelden.neu_kunde') }}
{{ anzahlArtikel }}
{{ $n(gesamtpreis, 'curprec') }}
{{ $t('shop.display.index.gespeicherter_warenkorb') }}
{{ $t('shop.display.index.hinweis_gespeicherter_warenkorb', { 'lastChange': $date(new Date(lastChange * 1000), 'datetimeMin'), 'anzahlPositionen': anzahlPositionen }) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_anzeigen') }}
{{ $n(e.anzeigeartikel.Artikelmenge, 'menge') }} {{ $t('shop.all.einheit.' + e.anzeigeartikel.Einheit) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_ausblenden') }}
Reducer f. Compression ring screw connect. 8mm-6 (M10x1)mm, brass
{{ $t('shop.all.artikelnummer') }}:
KRED 86 MS
{{ $t('shop.display.artikel.beschreibung_headline') }}
Temperature range:
-60°C up to max. +300°C (with seal: -20°C up to max. +80°C)
Recommended raw materials:
Copper, polyamide (with reinforced sleeve)
Note:
The brass compression ring screw connections cannot be combined with the cutting ring pipe screw connectors ISO 8434-1 (DIN 2353). When using soft copper tube a correction factor of 0.65 must be used (pressure x 0.65). When using polyamide tube the operating pressure of the tube applies.
Materials:
brass
Application:
With the use of reducing inserts you can use fittings with different hose diameters, e.g. a straight fitting with 10 mm Ø type KG 10 MS can be screwed together with 10 mm hose on the one hand. On the other hand, you can mount a 6 mm hose when using a reducing insert type KRED 106 MS. Thus, you have achieved a reduction from 10 to 6 mm. The reducing inserts can be used for all brass compression fittings. They consist of individual segments that separate from each other during assembly by means of predetermined breaking points.
-60°C up to max. +300°C (with seal: -20°C up to max. +80°C)
Recommended raw materials:
Copper, polyamide (with reinforced sleeve)
Note:
The brass compression ring screw connections cannot be combined with the cutting ring pipe screw connectors ISO 8434-1 (DIN 2353). When using soft copper tube a correction factor of 0.65 must be used (pressure x 0.65). When using polyamide tube the operating pressure of the tube applies.
Materials:
brass
Application:
With the use of reducing inserts you can use fittings with different hose diameters, e.g. a straight fitting with 10 mm Ø type KG 10 MS can be screwed together with 10 mm hose on the one hand. On the other hand, you can mount a 6 mm hose when using a reducing insert type KRED 106 MS. Thus, you have achieved a reduction from 10 to 6 mm. The reducing inserts can be used for all brass compression fittings. They consist of individual segments that separate from each other during assembly by means of predetermined breaking points.
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Nominal diameter of the screw connection [mm] | 8 |
| Reducer for hose Ø [mm] | 6 (M10x1) |
| Operating pressure with hard copper tube [bar] | 135 |
| Temperature range [°C] | -60 to +300 |
{{ $t('shop.display.artikel.info') }} KRED86MS
| {{ $t('shop.all.gewicht') }} | 2,8 g / pcs |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 74122000 |
{{ $t('shop.all.dokumente') }}
- {{ $t('shop.display.datenblatt.titel') }} ({{ $t('shop.all.englisch') }}) (Print view)
Catalogue page Atlas 9 (Page 139_n) atlas9_neutral_seiten/139_n.pdf
{{ $t('shop.all.unverbindliche_richtwerte') }}
Accessories
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred!
An error has occurred, please reload this page and try again.